| |
| Cirrus™ HD-OCT – Third Party Hardware and Software |
| |
The following hardware and software is compatible with the Cirrus™ HD-OCT.
Software Version 5
The Cirrus Version 5 Software has been tested with McAfee Virus Scan Enterprise (version 8.5.0 i), Kaspersky Anti-Virus (version 7.0.0.125) and Microsoft® Security Essentials (version 1.0.1611.0), but anti-virus software does not come pre-installed.
When installing your anti-virus software per manufacturer’s recommendations, configure it so it does not scan automatically, as this may interrupt the operation of the Cirrus instrument or your review station.
The Cirrus Version 5 Software is compatible with Windows XP Service Packs 2 and 3, and with Windows Vista Service Packs 1 and 2.
Compatible Printers
- HP 6980
- Brother HL-2700CN
- HP 6988
- HP 6000
Restrictions (see notes): 4, 5, 6, 7 & 8.
Network Switches
Generic
- Interface speed:
10/100/1000 Mb/s
- Interface connectors:
RJ-45
- Cable detection:
MDI/MDI-X (automatic straight-through or crossover cable detection)
- Supported standards:
IEEE 802.3, 802.3u, 802.3ab, and 802.3x
- Device must have CE approvals and FCC approvals.
Network Attached Storage
- NAS Drive
Restrictions (see notes): 4, 5, 6 & 7.
Other External Devices
- External DVD-RAM Drive
Restrictions (see notes): 5 & 7
- USB Hub
Restrictions (see notes): 1, 2 & 3.
- USB (Key Type) Storage Device
Restrictions (see notes): 1, 2 & 3.
Restriction notes
- Device must have CE approvals.
- Device must have FCC approvals.
- Device must be powered from USB port only.
- Device must be outside the patient environment (at least 1.5 meters away), unless used with an isolation transformer.
- Do not use with an extension cord or power strip.
- Use unshielded network cables (UTP) only.
- Do not share the same wall outlet with the Cirrus HD-OCT.
- Contact Carl Zeiss Meditec for compatible printer
driver version(s).
| |
|